KLUNK sound-HELP

**Kahuna** · 03/29/2004, 10:19 PM

Okay, here's my question!

When I'm at a stand still (maybe first start car), the car is in "PARK", when I shift to DRIVE" I can here it. A kinda gear engaging thing. I have no other way of saying it. It doesn't sound bad by any means...it just makes a "klunk" engaging noise. My wife has a Honda, which just seams to make no noise, I had an Jimmy and Amigo which I don't remember any noise.

Is that sound normal? Does your make the same noise? Is is the TOD engaging? Should I worry about it? Do I need Fluid?

HELP!!

**SPAZZ** · 03/29/2004, 11:11 PM

greasing the u joints and drive line grease points .....

3 total

**Andrey** · 03/30/2004, 06:24 AM

I have similar "klunk"... besides if you need to put it in reverse it does the same noise. I would love to get rid of the noise too...

**t2p** · 03/30/2004, 06:47 AM

Kahuna:
.
Ditto on Spazz's ideas ...........

a 'dry' slip joint can cause a clunk - especially on a Ford Explorer ..
.
t2p

**VX4EJR** · 03/30/2004, 09:12 AM

U Joints....Drive Line....Slip Joint.......what and where are these ?

**VehiP&J** · 03/30/2004, 09:17 AM

I have the same noise on my vx. It isn't even really a klunk noise it just sounds like the trans. engaging. Ok maybe a klunk noise, never thought twice about it. It is hard to describe

**SPAZZ** · 03/30/2004, 08:20 PM

the round long thing that moves when you are in gear that goes from rear axle toward front of your VX and hook to transmission....look for 3 grease points along here...if you like I could post a pic of what grease points look like???

**Heraclid** · 03/30/2004, 09:13 PM

I see all the zerks, but what grease to use? I saw one place (not here) where someone said they only use wheel bearing grease at the u-joints, never chassis grease.

**SPAZZ** · 03/30/2004, 10:48 PM

go to an Auto parts shop and ask...they will be able to help you

**AnalogVX** · 03/31/2004, 06:15 PM

I use a regular, general pupose, lithium grease.

**Moncha** · 03/31/2004, 06:19 PM

Really should be a high temp grease. Some lith based come that way, just be sure.

**Heraclid** · 04/01/2004, 07:52 PM

Was going to use lithium - thanks for the suggestions!

**xdfarrx** · 04/24/2004, 01:50 PM

I just got new Mobil 1 HI Temp synthetic Grease. Its red and I just did my whole driveline (which was clunking) I also did my energy urethane sway bar bushings. Stuff really seems to work well. What little squeks I had are gone, and the clunk is totally gone. Stuff was 4 bucks for a tube. Great stuff...

**Kahuna** · 04/24/2004, 02:29 PM

I'm going right now and buy some...thanks

**xdfarrx** · 04/24/2004, 06:22 PM

Autozone...fyi

Thread: KLUNK sound-HELP

Thread Tools

Display

KLUNK sound-HELP

try

the

if you can not figure it out

Mobil 1 Synth Hi Temp Grease

Similar Threads

waa waa sound

Why does the VX sound

No sound with new stereo?

clicking sound

Sound Dampening

Posting Permissions