Engine failure poll?

[Y33TREKker]

...I'll be replacing the PCV and EGR soon. Which part of the EGR tube should be replaced? I know there are two parts. I just don't know which one clogs. I've got my fingers crossed that this will eliminate the oil burning for a while.

The tube itself is generally what can become clogged, but it doesn't necessarily need to be replaced. It can be taken off and cleaned too.

While I didn't read through the entire thing, this thread has a link that probably includes about everything you would ever need to know about the EGR valve: removal and re-installation, cleaning, etc.

http://www.vehicross.info/forums/sho...light=egr+tube

[boondocksaint]

The tube itself is generally what can become clogged, but it doesn't necessarily need to be replaced. It can be taken off and cleaned too.

While I didn't read through the entire thing, this thread has a link that probably includes about everything you would ever need to know about the EGR valve: removal and re-installation, cleaning, etc.

http://www.vehicross.info/forums/sho...light=egr+tube

Again, much obliged. I know little about these cars, but am not new to wrenching on cars overall. Had a Subaru Impreza WRX/STi for a few years and recently totaled my 99 E36 M3. Turning a wrench isn't new, but the first time doing things is still just as intimidating now as ever.

[Y33TREKker]

The good news is that at least there's some room to work on these things if necessary, where compared to some cars today...uhm yeah...not so much.

Doesn't sound like you'll have any problems with this one, but even if you do, there's usually someone hanging out around here to provide a quick answer if you need it.