Yeah, I plan to paint my fangs, just need a good color.
I do like red, I don't know.
Yeah, I plan to paint my fangs, just need a good color.
I do like red, I don't know.
Knowledge is power!
Hi all...
Will the fangs from the US version fit the Japanese version? Sam If you do get them let me know.... Sounds interesting...
Thanks...
An angry man is seldom reasonable, a reasonable is seldom angry
i think they would. someone on site here had an import, well they al are technically, but you know what i mean. he had one straight from japan.
he put em on no prob.
paint dem thangs![]()
freedom is not free~the job is never done
I saw a picture of one here on the site, a close up front shot with the hood opened, and the fangs appeared to be polished or chrome - looked sharp! Anyone have any details on that?
ameetw
the U.S. fangs fit perfecty on a Japanese VX. I got my fangs from U.S. too.
Anyone ever polish their fangs? I'm very tempted to do so.
If you have, can I see a pic?
Thanks!!
SilverBullet75
Formerly: '01 Ebony VXSTLTH
Now: '08 Saab 9-7x Aero 6.0L
A cool thing to do is:
Polish them on a buffing wheel until they look like chromium. They are made of brushed stainless so they shine like crazy if you do it right.
Start out with 400 wetordry sand paper (wet) and work your way to 800, then a buffing wheel (for jewlery et al) with emery, then stainless polish, finally rouge.
The end result is VERY shinny!
Oh, and they ARE made of stainless steel. Just like my kitchen sink. I see people talk of them being aluminum. I even thought they were too untill I started sanding on them. There is no way aluminum is that hard, at least on my planet. They go *CLING* when you drop them instead of -clank- and everything that isn't aluminum like. I have never tried to stick a magnet on them though-
Anyhow, when stainless gets past a certain formulation its non magnetic. Its one of those chemistry things.
Just trust me, theyre not Aluminum, or Kyptonite, or even Titanuim (at least MINE arent)
It would be kind of cool if they WERE Kryptonite tho' You could run down that candyass superman! And he would be all sayin' " aaaaaaahh, super powers worthless against evil Japanese import"...THUD! and then heed flip up into the air and be all flying over the hood, and I'd be all laffin, talkin smack about him and junk!
You know, thats if they were made of Kryptonite.
Last edited by SpaceTruck'n : 02/18/2005 at 03:37 PM
As for the telepaths, I have learned to recognize them and
ignore them. The worst thing you can do is block them and
make them mad, When it gets to be too much, I put my
fingers in my ears and sing, "FLINTSTONES, MEET THE
FLINTSTONES."
Its labor intensive tho' not for everyone.
You don't NEED a buffing wheel it just makes it easyer. If you dont have one just keep going with the wetordry, after 800 grit use 1000 and on up to 1500. Finish with fine pollishing compound.
But painting them is a cop out, you may as well mask off the grill and paint the area the fangs are installed on. Save the fangs so whan you get tired of the paint you can cover it up in a jiffy.
Oh and I guess I got carryed away on that last post. You know about the Kryptonite? Sorry, but Its friday you know. And I would NEVER run down Superman.
Unless I had Kryptonite fangs!
![]()
Last edited by SpaceTruck'n : 02/18/2005 at 03:46 PM
Got mine Chromed a while back
Take a look in my gallery for pics
The Bantan's Relm
Gallery
Myspace Page
"Our lives begin to end the day we become silent about the things we care about."
AFAIK, 300 series (Austenitic) stainless steels are non-magnetic unless they have been work-hardend. The rolling/stamping processes used to make the fangs would have work-hardened them.Originally Posted by SpaceTruck'n
A magnet does not stick to them. They look (and scratch) just like aluminum. Aluminum will polish up well with the wet-dry to 1000 method and some polishing compound. Protect the new surface with BoeShield T-9 or a butt-load of wax. Avoid using ammonia based cleaners, ammonia corrodes aluminum.
Originally Posted by mbeach
Ok, whatever.
Sounds like you know what you talking about.
I was originaly going to duplicate some in Al and then machine face them with a spinning wire brush. (So they would look like the nose on the "Spirit Of St. Louis") and I would have another set if I ruined them. But they are such a complex shape I blew it off.
All I know is: They are hard, very difficult to bend ( considering the gauge of the material ) and they look cool shinny.
If they are indeed Al, anodizing them would look pretty cool too!
Oh, and thanks a lot dude. Now I simply MUST know what they are made of. Even if I have to check the specific gravity! Im going to take one off and put a drop or two of Hcl acid on the inside. If I get bubbles Ill eat a bug.
![]()
Last edited by SpaceTruck'n : 02/21/2005 at 11:19 AM
:laughr:Originally Posted by SpaceTruck'n
I have a non-ferrous metals scrapyard not too far from me. The guy there has a "gun" that'll tell you the composition of any metals that he points it at. Pretty nifty. Maybe I'll drive over there and check it out.
They do seem rather tough for such a thin gauge of metal. Maybe they are kryptonite after all? I'm seriously thinking about polishing mine now too. They don't have any real scratches on them, so a pad and some rouge might do the trick.
I cant beleive I actualy tested them, but I was begining to doubt my OWN superpowers.![]()
The day that happens you are shafted man!![]()
So, I removed my right side fang.
I roughed the inside up with a Dremel tool to provide a virgin surface.
I put a few drops of pool acid (Hcl) on that area. At the same time I put the very same acid on a chunk of non anodized aluminum that I roughed up in the very same way.
Within ten seconds the aluminum was bubbling and liberating large quantitys of noxios vapors (cough, cough). At the very same time the mystery metal the fang is made out of was doing... Nothing.
Nada.
Zip.
I then poured the acid from the fang onto the aluminum causing even more bubbles, noxios vapors, heat, etctera.
I can't say what exactly the fangs ARE made of, but they are one thirty second of inch thick, are not magnetic, and do not throw sparks when you grind on them.
I do believe they are stainless steel, "just like my kitchen sink" NOT aluminum, or any significant amalgum thereof.
Other sugestions are welcome.
Peace.![]()
Stainless steel throws sparks on a grinder.
I stopped by the Non-Ferrous Metals Scrapyard today. My hookup wasn't around to do the test on the fangs. I'm really anxious to know what these things are made out of as well.
I'd like to polish them, but now I don't know where to start.
Yea, I used to have a welding book that had pictures of all the different types of sparks metals made when you grind them, but I cant find it in this pig stye.Originally Posted by mbeach
![]()
However as I recall you are right, Stainless indeed throws sparks but they are wimpy and few.
So once again I removed my trusty right side fang, reved up my angle grinder and sacrificed a bit of clip part that holds it on.
VIOLA!
Sparks.![]()
Nothing to set fire to anything with but nevertheless there were sparks. I just had to use the right tool for the right job.![]()
Trust me they are stainless steel. Test them with that gun, you will see I'm not full of crap.
I was acid etching aluminum most all day today, and after a while you get a sense for metals. Like... Ask your recycling freind. Ill bet he hardly ever really uses that gun. You can tell by the feel, the heft. "The texture. The taste! I love GOoooooLD"![]()
As far as pollishing then is concerned just go with post #02-18-2005 03:54 PM and you cant go far wrong. One thing to remember: If you use a buffing wheel they get hot FAST so dont stay in one place too long and protect your fingers from getting burned.
Don't worry you wont ruin themTheyre Kryptonite!
Aluminum leaves black stuff on your hands, It drys out your skin until it cracks. I love to work with it but is messy.