Page 1 of 2 1 2 LastLast
Results 1 to 15 of 21

Thread: Please post pics....

  1. #1
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0

    Please post pics....

    I'm interested in seeing everyone's aftermaket or modified intakes, just curious on what people are doing out there.

    Thanks- Jay
    Draftsman of the dead

  2. #2
    Member Since
    Jun 2002
    Location
    '99 SC Ebony #1961
    Posts
    1,559
    Thanked: 0

  3. #3
    Member Since
    Jun 2002
    Location
    2000 Dragon Green VX 0485
    Posts
    379
    Thanked: 0
    Most impressive, very nice.

    Bob F
    Neither ordinary or extraordinary, just indefatigable.

    2000 VX Green Dragon- Chick Demagnitizer-Supercharger-Injen Intake- Cold air box-K&N- Power Vault SS Exhaust-265-75-16 BFG MT kms-On Board CO2- Custom Boulder Bars- Custom Skid plates- PIAA 520 Fog Lites-3inch lift with OME 912 Springs-LINE X Bedliner on Cladding & Hood Insert-ARB Front Lockers & Custom Bull Bar. Vintage Offenhauser Hood scoop Thule Rack. XM Radio-Custom Storage Box-First VX to surmount the RUBICON.Thanks Sierra Stompers

  4. #4
    Member Since
    Aug 2003
    Location
    1999,Silver,Vehicross,0928
    Posts
    1,087
    Thanked: 0
    Originally posted by Cyrk
    im guessing tats the hotshot intake?
    ________
    Zoloft lawsuit
    Last edited by MZ-N10 : 09/05/2011 at 04:33 PM

  5. #5
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    Now this is interesting....

    I'm noticing, now please forgive my lack of terminolgy. From the intake tube, there is a intake line, on mine runs across and infront to the left side of the engine.
    Yours, you have from what looks like going back through and out to the wheel well and a small filter on your engine.

    What the purpose in that and why?

    Inquiring minds would like to know.....

  6. #6
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    I know a lot of people say about heat soak and trying to get the cold air in from outside the vehicle, but does'nt that little filter defeat that purpose by sucking in hot engine heat?

  7. #7
    Member Since
    Jun 2002
    Location
    00 00 00
    Posts
    1,627
    Thanked: 0
    Originally posted by jayfotos
    Now this is interesting....

    I'm noticing, now please forgive my lack of terminolgy. From the intake tube, there is a intake line, on mine runs across and infront to the left side of the engine.
    Yours, you have from what looks like going back through and out to the wheel well and a small filter on your engine.

    What the purpose in that and why?

    Inquiring minds would like to know.....
    Jay, it's a crank case breather filter. The crank case expels gasses through the hose back into the intake. The filter filters out the gases/oil. I just put a fuel filter on mine and plugged the hole in the intake.

    I see Cyrk also has the coolant bypass as well, as I do. I also plugged the hose going out of the PCV valve, and put a fuel filter on the valve as well.

  8. #8
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    How does all that help?

  9. #9
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    my engine bay

    Optima Redtop is starting battery.
    Optima Yellowtop runs Warn XD9000 Winch and 400 watt audio amp.
    160 Amp Alternator sends charge to a 200 watt battery isolator charging either battery as needed.
    Calmini air filter.
    Tornadoe inside intake hose.
    Extra 12 inch auxillary cooling fan beside stock 10 inch fan.

  10. #10
    Member Since
    Jun 2002
    Location
    2001 Proton VX 0790
    Posts
    801
    Thanked: 0




    These are the ones I've made up. My next step will be a straight tube from the filter to the throttle body.

    John C.

  11. #11
    Member Since
    Jun 2002
    Location
    '99 SC Ebony #1961
    Posts
    1,559
    Thanked: 0
    MZ-N10, It is part Hotshots and part VW Golf intake.

  12. #12
    Member Since
    Jun 2002
    Location
    2001, Ebony
    Posts
    439
    Thanked: 0

    When???

    Dude jayfotos when are you going to be around? I have to meet up with you and check out your ride...

  13. #13
    Member Since
    Jun 2002
    Location
    00 00 00
    Posts
    1,627
    Thanked: 0
    Originally posted by jayfotos
    How does all that help?
    The coolant hoses that run into and out of the top of the intake manifold circulate coolant through the manifold for warm cold-engine starts. It heat up the manifold (circulating warm coolant through it) so the engine starts better on cold days... if you live in a wamrer climate you may consider bypassing the manifold by just taking both hoses off the top and adding a "barb" or fitting in between (joining both hoses together). Some say you can gain a little horsepower this way... I think I feel a difference, maybe not.

    The crank case expels a little gas back into the intake, which goes back into the manifold and engine. Adding a filter keeps the gasses from going back in... whether it helps of hinders, I don't know. You'll hear both sides, but I think many agree it is just cleaner.

  14. #14
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0

    Re: When???

    Originally posted by VCAMILO
    Dude jayfotos when are you going to be around? I have to meet up with you and check out your ride...
    Anytime, PM me and I'll give you my #.

    Jay

  15. #15
    Member Since
    Feb 2004
    Location
    2001, SUPERCHARGED!
    Posts
    507
    Thanked: 0
    Originally posted by Dallas4u
    The coolant hoses that run into and out of the top of the intake manifold circulate coolant through the manifold for warm cold-engine starts. It heat up the manifold (circulating warm coolant through it) so the engine starts better on cold days... if you live in a wamrer climate you may consider bypassing the manifold by just taking both hoses off the top and adding a "barb" or fitting in between (joining both hoses together). Some say you can gain a little horsepower this way... I think I feel a difference, maybe not.

    The crank case expels a little gas back into the intake, which goes back into the manifold and engine. Adding a filter keeps the gasses from going back in... whether it helps of hinders, I don't know. You'll hear both sides, but I think many agree it is just cleaner.
    I might try the bypassing of the coolant, I'll talk it over with my shop guy...it's waaaay to hot here and that might help.

    Thanks- Jay

Similar Threads

  1. Post All Moab Trip Pics/adventures Here
    By Ldub in forum Moab 'Zu XIV May 17, May 21, 2011
    Replies: 252
    Last Post: 06/23/2011, 06:13 PM
  2. Post All Moab Trip Pics/adventures Here
    By Ldub in forum Chit-Chat ...
    Replies: 6
    Last Post: 05/14/2011, 08:44 AM
  3. Post your 2008 ZuZoo pics/adventures here!
    By Triathlete in forum VX Talk...
    Replies: 176
    Last Post: 05/08/2009, 08:11 AM
  4. Please post pics/diagram of radio removal
    By nater in forum VX Modifications...
    Replies: 6
    Last Post: 04/17/2009, 08:03 PM
  5. Anyone with a morgan-tec intake please post pics!
    By morgan-tec in forum VX Modifications...
    Replies: 3
    Last Post: 06/05/2005, 05:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails