Results 1 to 6 of 6

Thread: Finally got my LIFT!!!!!

  1. #1
    Member Since
    Mar 2004
    Location
    1999, silver, 0724
    Posts
    30
    Thanked: 0

    Finally got my LIFT!!!!!

    I don't know why I didn't do this mod sooner! I love the way the VX looks lifted, and bigger tires give it just the right touch!

    The lift itself was a very easy task, especially for me...I was the supervisor/tool girl!!!! It took my husband 2 hours to lift, add skid plates, and re-seat one of the coil springs.

    Here are a few pics before & after the lift!


    http://www.vehicross.info/gallery/sh...=&sort=1&size=

    http://www.vehicross.info/gallery/sh...=&sort=1&size=

    http://www.vehicross.info/gallery/sh...=&sort=1&size=

  2. #2
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Just some friendly advice. Check the angle of the CV shafts and maintain the stock rake angle by making sure the front is 1.5 to 2" lower than the rear. You could alternately install the darlington front axle drop kit. This will save stress and wear on the cv's (which have a dealer replacement cost of over $1k per side). I've done a little reasearch on this and you should find it with a "rake angle" search.

  3. #3
    Member Since
    Jun 2002
    Location
    '99 Ebony Black VX, 0339
    Posts
    2,073
    Thanked: 0
    Joe is set for another production run any day now but only has a few orders - this is a HIGHLY recommended mod and as stated, can save you a big repair bill. Place your order or deposit now! http://darlington-offroad.com/catego...?UCIDs=1135292

  4. #4
    Member Since
    Mar 2003
    Location
    '00 Ironman #0145, '01 Kaiser #0946
    Posts
    688
    Thanked: 0
    Those Darlington differential lowering brackets look AWSOME! The $189 price tag isn't bad either IMO as I had quite a bit of time in my set I modified from stock... NICE! My only problem would have been with only 1.5" of drop, they wouldn't have given me enough space for my LS1 to clear... I would have had to REALLY modify my oil pan if no go to a dry sump system! Anyway... nice product!
    Coach... aka Randy! (I often forget who I really am!)

    My 2000 Ironman VX!... Nitto Terra Grapplers 285/60/18's on stock 18" rims, Power Vault Muffler, Tone Monday's custom tow package, OME 912 Springs, custom audio/video/multimedia computer system in the works! Transformation to LS1 V-8 Power as we speak!
    My Webshots Gallery...

  5. #5
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    coooooooool!!!

    now we can go wheeling sometime........either you or Rory give me a call. I started work last week...hours are Sun5PM till whenever work is done through Thurs...Friday, Sat off.

    Seriously, I have to check it out...I remember the first time I Saw it...mini me...now you should be up in heighth.

  6. #6
    Member Since
    Mar 2004
    Location
    1999, silver, 0724
    Posts
    30
    Thanked: 0
    SPAZZ, we will have to get in touch with you. We both work Sun-Tues. off and on Wed. nights, but other than that we are usually around............just remember, mine is a daily driver so I can't beat it up to much(from the pics I see what kind of stuff you drive over!!) Our friend is going to lift his Trooper as well and he would love to come.

Similar Threads

  1. Lift installed.......finally!! OME 919
    By dsallade01 in forum VX Modifications...
    Replies: 1
    Last Post: 09/15/2013, 07:32 PM
  2. To lift or not to lift that is the question
    By CatFish in forum VX Talk...
    Replies: 5
    Last Post: 03/28/2012, 03:15 PM
  3. Well, I finally got one!
    By alanbradley in forum VX Talk...
    Replies: 16
    Last Post: 12/09/2007, 06:32 PM
  4. Lift thread to end all lift threads
    By tbigity in forum VX Modifications...
    Replies: 14
    Last Post: 05/22/2007, 10:54 PM
  5. Whew! My lift and other mods are finally finished!
    By LITTLELAURIE in forum VX Talk...
    Replies: 24
    Last Post: 12/02/2004, 09:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails