Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: Nitto Grapper Size?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2002
    Location
    2000 FIREFOX 0009
    Posts
    116
    Thanked: 0

    Nitto Grapper Size?

    Terra Grapplers are avail in Two sizes
    255-55-18 and 285-60-18

    I want to know what size I should get
    Are they good in the snow?

    Any Comments?
    Thanks STEVE

  2. #2
    Member Since
    Jun 2002
    Location
    2000, Black, VX, 0021
    Posts
    172
    Thanked: 0
    I have 60/18's and love the look... check my gallery for pix

    As far as snow, they are ok but have a hard rubber because of big tread blocks so not optimal for snow.. they seem to load up with snow and can get a little slippery.. Nothing like my bald factory tires though. a good snow tire has a lot of siping and soft rubber so if you plan to do a lot of driving in the snow I would recommend getting snow tires for the season.
    Anthony


  3. #3
    Member Since
    Jun 2002
    Location
    2000 Kaiser Silver VX #0416
    Posts
    72
    Thanked: 0
    I have the 285's and they are great tires. Really fill out the wheelwells and have done well with everything I have given them - sand, rocks & snow. I would caution you that the wide tire is a bit scary in icy conditions and it really likes to track in road grooves.
    Trenton

    *******************************
    285/60-18 Nitto Terra Grapplers, Removed Airbox Elbow, Removed Rear Seat, Trooper Skid Plate, Yakima Load Warrior, HD chromoly tie rods, ball joint flip

    Here's to the crazy ones

  4. #4
    Member Since
    Jun 2002
    Location
    2000 FIREFOX 0009
    Posts
    116
    Thanked: 0
    If I get the 285's and trim the front cladding,
    am I going to have any other problems?
    Without lifting my truck.
    Like hitting top of wheel well or alot more
    were and tear on front end?
    Is $800 installed a good price? for the 285's
    Can get the 255's installed for $660

    THANKS STEVE

  5. #5
    Member Since
    Sep 2002
    Location
    Previous owner of #1068
    Posts
    175
    Thanked: 0
    No problems here 285/60/18s. I've been off-roading with them and had NO clearance problems at all (just the minor trim on the front). They did a great job, only got stuck once in a nasty mud hole where I bottomed out. I have a picture of the "other side" of this shot if you want to see how they have plenty of room even inside the wheel well.

    http://www.vehicross.info/gallery/da...x-mud-flex.jpg

    Jay

  6. #6
    Member Since
    Apr 2003
    Location
    2001 Grey VX 0867
    Posts
    133
    Thanked: 0
    For you guys with STOCK wheels and the 285/60/18's-How far do the tires stick out from the wheelwell?

  7. #7
    Member Since
    Sep 2002
    Location
    Previous owner of #1068
    Posts
    175
    Thanked: 0
    Not much at all. It is nearly even with the wheelwell. Not a great pic, but you can see here they don't stick out much at all.



    Jay

  8. #8
    Member Since
    Jun 2002
    Location
    2000 FIREFOX 0009
    Posts
    116
    Thanked: 0
    Well I ordered the 285's
    Getting them put on SAT. morn
    Just trimmed the front wheel cladding took about 5 min.
    Now I just need tommorow to come!!

    STEVE

  9. #9
    Member Since
    Jun 2002
    Location
    2000 FIREFOX 0009
    Posts
    116
    Thanked: 0
    Man ,when they rolled out those tires I didn't think they
    would fit. Got one of front tires on for a test fit. No problem!
    Looks like it should of came with those tires! Fill out the
    wheel wells, and from the back and front they look wide.
    VX looks like I need to find some mud.

    THANKS STEVE

    285/60/18 NITTO'S

  10. #10
    Member Since
    Jul 2003
    Location
    1997,Silver
    Posts
    177
    Thanked: 0
    Hi,
    What is the width "in inches" is your stock rim?

    Thanks

    Ameet
    An angry man is seldom reasonable, a reasonable is seldom angry

  11. #11
    Member Since
    Sep 2002
    Location
    Previous owner of #1068
    Posts
    175
    Thanked: 0
    Raz,

    Be sure and go with a buddy mudding. I think these tires did a good job, but I got stuck in what I felt I should have been able to get through. They did real good climbing dry steep loose hills, haven't had them on rock yet. Of course my friend with the jeep laughed at me when I got stuck... his time to get stuck and have me strap him out came soon after so the lesson learned is that you just never know how deep or thick the mud hole is until it is too late.

    Jay


  12. #12
    Member Since
    Jun 2002
    Location
    2000 FIREFOX 0009
    Posts
    116
    Thanked: 0
    Thanks good advice,
    Hey what air pressure do you have in your tires?
    I got mine at 36#'s
    I still can't get over how good they look!

    I think the stock rims are 7''

    steve

  13. #13
    Member Since
    Jun 2002
    Location
    2000, Black, VX, 0021
    Posts
    172
    Thanked: 0
    I run mine at max psi, I think 44. I like to run high and watch for wear and adjust accordingly.

    These tires are really hard and seem to be wearing quite well.

  14. #14
    Member Since
    Jul 2003
    Location
    1997,Silver
    Posts
    177
    Thanked: 0
    Hi all,

    I'm just worried, Some of you guys went for the 285mm where as the rim is only 7" or ~178mm.

    The rim width of 285mm is a about ~11" The question is is it safe? It's about 4" difference. Any one know what is the safety limit here? I really do want to go for the 285 but a but worried.

    I currently have the 16" rim.

    Thanks
    Ameet

  15. #15
    Member Since
    Apr 2004
    Location
    2001 Proton 0951
    Posts
    113
    Thanked: 0
    Anyone notice a difference in gas mileage with these tires?
    Life is what happens when you're driving a VX...

Similar Threads

  1. Nitto's
    By Pepino in forum VX Modifications...
    Replies: 12
    Last Post: 11/03/2008, 07:06 PM
  2. Rim size/Tire size
    By Dumke in forum VX Talk...
    Replies: 15
    Last Post: 01/31/2007, 03:00 PM
  3. Help..Geo's vx Nitto's?
    By drdavidr4u in forum VX Talk...
    Replies: 26
    Last Post: 01/21/2005, 05:29 PM
  4. Got my Nitto's
    By autox-racer in forum VX Modifications...
    Replies: 2
    Last Post: 08/13/2004, 03:27 PM
  5. Nitto Mud Grappler !!
    By psychos2 in forum VX Talk...
    Replies: 4
    Last Post: 05/29/2003, 02:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails