rear speakers

[Amack76]

ok no bs please. can someone who has actually installed and replaced the rear speakers please tell me what size will fit there, and the steps to remove the back panel.

[SPAZZ]

the rear spekers are like 4 inches...serious. If you remove the metal plate and plastic adapter you can fit 6x9's.
or do like I did and just cut holes for 12's and insulate whole inside and out with Dynamt extreme;Dp; ;Dp; ;Dp;

[coachreed]

Like Spazz said, they are something like 4" speakers (some metric variation from standard)... to squeeze even a pair of 5¼" speakers requires that you cut the speaker mounting brackets AND some of the sheet metal behind the speaker. Otherwise, you are stuck with some very little speakers... then again, rear-fill is best anyway... don't need a ton of sound from the rear stage to sound good. Good Luck!

Coach... I mean Randy (I often forget who I really am)

Undergoing LS1 Conversion as we speak!
Click Image to Visit My Website!
My Webshots Gallery...

[kpaske]

SPAZZ -

You mounted 12's in the rear seat side panels? How the heck did you manage that?

[Triathlete]

Check Spazz's gallery and I believe you will find some pics!

[Francesco Rizzo]

I just tried to change them, and they are 4 inch, with 5.25 in the front. These lil brats are a b|tch to get to and tough to find a good pair of 4 inch speakers for less then 80 bucks. Pioneer makes a set but are kinda week compaired to the sony's 5.25's. The thing is that for mids and highs, a 4 inch with good tweeters work great. I had a problem as the box I keep in the back for the bass drowned out the stock speakers and all you hear is the beet when you sit in the back. I went to wallmart, grabbed a set of tweeters for 20 bucks, and installed with a 2.5 inch drill bit... I think.. anyway, it solved the problem and looks like this:


[IMG] http://www.geocities.com/bugging75/PICT0359.JPG [/IMG]

[CrzyFool]

I have 6x9's in the back there . . . they fit with some minor modification. :-)

[crager34]

Circuit City just told me a couple days ago all 4 speakers are 5 1/4".

[AlaskaVX]

We have 4" speakers in the back and 5-1/4 up front

[coachreed]

Circuit City just told me a couple days ago all 4 speakers are 5 1/4".

That, my friend, is why I call those clowns, "Circus City"... how would one expect that a 4" speaker is a 5¼" speaker? There is a distinct difference. The measurement is of the actual cone diameter at the outer edge of the surround (flexible part of the cone)... the rears measure an even 4" and the fronts measure a touch over 5"... With a little care, you can easily put a nice pair of 6½" speakers up front without any cutting, and with a slight amount of trimming, you can upgrade to 5¼" in the rear. I have Alpine TypeR Component 6½" up front with the tweeter mounted behind the stock tweeter panel up front on the door, and I am running Alpine TypeR 5¼" Components in the rear... If your not familiar with the physical build of TypeR speakers, they are VERY large in comparison to most comparable speakers. I would post pics of the stock speakers but can't figure out how to upload to my gallery or attach to this thread... maybe something has changed with the new board. Anyway... hope that answers some questions.

[TDAWG]

Maybe I'm the only one but when I changed my front speakers they were 6 1/2. Who ever owned my VX before me had already done the change over to 5 1/4's. To my surprise it was done very good. once it gets warmer here in RI I'll post some pics since I well be changing them from kenwoods to sonys.

[Maugan_VX]

I'm not sure what personal experience you've had with sony's but every friends' car thats had sony's has sounded horrible.

IMHO Kenwoods are higher quality.

[Dallas4u]

I know the reasoning behind people wanting rear speakers... needing more volume and, possibly, more separation of midbass and treble from the rear. I can tell you this... if you have a nice, quality front audio setup, tuned and facing the driver as much as possible, there really is no need for rear speakers (other than maybe a sub for extra bass, if you wanna!). In a perfect world, you would be able to aim the front mids and tweets how ever you wanted... finally aiming them in a spot that would sound great to front and rear passengers. In the stock setup you can get pretty close and still not need to mod the rear speaker brackets or frame for a larger speaker setup. I know... I effed up the brackets originally by putting in 5.25" speakers, then 6x9's... I thought I had blown them (Infinity Reference) and left them in for a long time... finally removing them, improving the quality of my front setup, and it made a HUGE difference!

[TDAWG]

I have yet to have any problems with Sony Xpolds. But the kenwoods that are in the rear must have been made in the early 90 cuz they a made of paper.

[james1_10018]

By the way guys I think the stock speaker work the best (They are clarions by the way)
I changed the front to Audiobahns 6.5 and I have to say the Audiobahn sound horrible . In my opinion get a better 5.25 and add a sub (my 2 cents)