Results 1 to 5 of 5

Thread: Loose steering

  1. #1
    Member Since
    Oct 2003
    Location
    2000 Kaiser
    Posts
    375
    Thanked: 0

    Loose steering

    steering?
    stearing?

    anyhoo, you know what i mean


    at speeds above 80, the steering wheel has alot of play in it. at least 2 inches to either side.

    what can be done to tighten this?

    when i turn the wheel i want the wheels to turn, and vice versa

    no, i havent done a search yet, its too early in the morning.

  2. #2
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    There was a write up either here or on vmag. Don't know if it applies to conditions that occur at speeds above 80 . May be worn stg. components?

  3. #3
    Member Since
    May 2004
    Location
    No VX anymore. :(
    Posts
    1,335
    Thanked: 0
    I hit a speedbump cluster at high speed a few months back and rattled my steering loose a bit. It's only about 1/16" of play, and hardly noticeable at all, but shakes a little when i hit bumps. Fixable? Should I bother?
    Steve

  4. #4
    Member Since
    Jul 2004
    Location
    2000 Black VX 0363
    Posts
    766
    Thanked: 0
    *DISCLAIMER* I haven't even looked at the steering box on the VX, but I'm assuming its the recirculating ball setup we have on the troopers.

    If you look down at the power steering box, you'll see 4 bolts with a flathead screwhead and nut in the middle of those 4 bolts.

    Its helpful to hit the whole thing with some PB Blaster about a day before you try this. Get a flat head screw driver and hold that center screw in place while you break the nut free. It wont be easy more than likely.

    Once the nut is free, turn the screw clockwise to tighten up the steering play. Use SMALL adjustments, less than 1/4 turns, it wont take much.

    Once you have it where you need it, tighten the lock nut down again. Probably wouldn't hurt to use some mild (blue) thread locker on it to hold it in place.

    Again these instructions are based on the steering box in the troopers. If it isn't the same then I'm sorry.
    2000 Black VX 105k

  5. #5
    Member Since
    Sep 2002
    Location
    '01 EBONY 1330 r.i.p. now '01 PROTON 0987
    Posts
    799
    Thanked: 0
    Originally posted by transio
    I hit a speedbump cluster at high speed a few months back and rattled my steering loose a bit. It's only about 1/16" of play, and hardly noticeable at all, but shakes a little when i hit bumps. Fixable? Should I bother?
    Where are you finding the 1/16th of play? You might've lost a shim or loosened a sleeve. It should be checked if it's not like it was prior to the speedbumps.

    As suggested by another member I purchased the Firestone lifetime alignment for $100+

Similar Threads

  1. Loose steering wheel - Need help.
    By jtirado in forum VX Talk...
    Replies: 9
    Last Post: 04/02/2018, 03:34 PM
  2. Transmission Loose?
    By ipd in forum VX Troubleshooting...
    Replies: 3
    Last Post: 01/31/2016, 07:44 AM
  3. How loose is your steering??
    By Ben KVX in forum VX Troubleshooting...
    Replies: 35
    Last Post: 11/18/2012, 02:29 PM
  4. steering loose/dealer blames tires
    By dutchie in forum VX Troubleshooting...
    Replies: 13
    Last Post: 01/02/2004, 10:41 AM
  5. Loose Steering
    By Leah in forum VX Troubleshooting...
    Replies: 2
    Last Post: 09/23/2003, 07:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails