I am about to remove the ISUZU emblem from my rear. Nothing against ISUZU but I just don't like the way it looks. I am looking for ideas and perhaps the things others have put on theirs.
Super VXer
I am about to remove the ISUZU emblem from my rear. Nothing against ISUZU but I just don't like the way it looks. I am looking for ideas and perhaps the things others have put on theirs.
From Unimog to VX - a serious change in velocity - a small sacrifice in voracity.
Super VXer
A simple "VX" logo of the same type and style would look nice.
Either way, I usually debadge simply because I hate waxing around all of the obstacles.
Super VXer
I have NASA written accross the back, but if I can ever find a long (3-4') antenna with a blinking red light at the top, I will rebadge again to say RC PRO-AM cus that game rocked!
2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.
2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......
Super VXer
I thouhgt of the VX. Maybe like this one?
The NASA idea rocks. Must create quite a bit of confusion.
Super VXer
AKVX,
Where did you find a NASA decal and do you have a pic? I've been looking for a NASA decal forever.
carlymac '99 IRONMAN , #0278, Hendersonville, Tn.
Super VXer
I figure that you could flip/rearrange your current ISUZU into a NASA
Super VXer
My younger brother worked at a sticker shop and I had him make one up for me. Just find a small shop that deals with vynil (sp) and have them make you one, it shouldn't be more then $30. There is a pic in my gallery search for "NASA stuck" it's a real blue pic for some reason, but you can see the NASAOriginally Posted by carlymac
Last edited by AlaskaVX : 01/14/2005 at 11:09 AM
Super VXer
I am working on a polished aluminum version of this design I created w/Adobe Illustrator and Photoshop.
I may post some for sale if people are interested.
(anybody know why it says I May NOT post attachments?)
Thanks,
SilverBullet75
Formerly: '01 Ebony VXSTLTH
Now: '08 Saab 9-7x Aero 6.0L
Administrator
Yep, regular, registered users are not allowed to post attachments.. One of the bennies that goes with a donating member...
Scott / moncha.com
Super VXer
Hi Bert!
You may already have the answer to de-badging. But it is easy.....I used a hand held hair dryer. Went an "edge" and "corner" of one of the letters and gently started peeling using my fingernail. Then once I got enough to get a good grip started peeling keeping the dryer blowing hot air between the paint and emblem. Its pretty easy. You could probably wait til summer and dispense with the hair dryer. Its kinda like real stiff duck tape. It'll leave a little shadow behind that you can remove with a mild auto polish...
John
Super VXer
I bought the badge off the front of an axiom, says isuzu and put it on my rear door, opposite of the tod, so it balances it out and still says isuzu, but not obnoxiously
Ryan Christiansen
Trooper Skid Plates, OME 912's, Stric9 Sliders, Load Warrior with extension, Apline sub in rear door, Apline front speakers, Alpine head unit, Definity Dakota MT 285/75 R16, Aussie Lockers Front and Rear, 4.77 gears and Warn Manual Hubs.http://picasaweb.google.com/RyanVehiX
Super VXer
NJ99VX -
Do you have a pic you can post?
Calmini Cone Air Filter, PowerVault PV2 Muffler, OME Trooper Springs, Rancho RS9000X Shocks, 285/75R16 Nitto Grappler AT's, Pioneer DEH P8000R In-Dash CD, Amps and Drivers Built by Orion, Wires and Fuse Blocks by KnuKonceptz, Vibration Damping by BQuiet, Alarm System featuring Auto Start and Remote Windows, Yakima LoadWarrior w/Full Size Spare, Debadged/Custom Titanium Grill Logo, Tint (5% Rear / 20% Front), Steel Braided Brake Lines, G2 Painted Calipers
Super VXer
gonna try to post a pic, never done it before. I only wish I had the emblem up a little higher, kinda got stuck where it is, hehe.
Last edited by VX1032 : 01/18/2005 at 09:18 AM
Administrator
When you want to post a picture from your gallery, you will now notice a little feature shown in the details of your photo.
You should see a title saying "UBB Code", this contains an image tag looking like this:
[img ]http://www.vehicross.info/gallery/data/500/1232back.jpg[/img ]
All you need to do is copy this line and paste it into your post where ever you want the photo to show up.
No more right clicking on the photo to obtain it's URL.
Super VXer
[QUOTE=SilverBullet75]I am working on a polished aluminum version of this design I created w/Adobe Illustrator and Photoshop.
I may post some for sale if people are interested.
Here is the final product... I just took the picture last week, but the badge has been on for a while now.
Let me know what you all think!
Thanks!
(see my gallery for more shots)
Posting Permissions
Reply With Quote
