anyone know the part number

[Amack76]

does anyone know the part number for the cubby hold that fits where the stock cd changer is, ive seen it on here b4 and can't find it

[Dallas4u]

I believe it is 89711-47570, labeled as the Trooper Instrument Panel Components Pocket.

[CSTYLES]

Storage box IS available to replace the area where the changer resided and has not been discontinued nor will it by for a few more years as it fits up to 2003 Isuzu products. p/n is 8-97129-980-0 and St Charles will sell to us for little more than $10 w/ free shipping. Toll Free: 800-727-8066

Found this hope it helps.

[Dallas4u]

Seems 897129-9800 has the same description but fits 98-02 Trooper, and 89711-47570 fits 95-97 Trooper.

I'd go with the 98-02 (897129-9800) item. I remember I replaced mine 4 or so years ago... but I can't remember which parts number I used.

[Tone]

Both fit

[Offroad vx]

You guys read my mind, I'm yanking my cd changer which is packed with the previous owner's cd on Wed. and planned to make that a storage area!
Plus this will be my first mod - Pioneer 8600 cd player!

[joe-yamma]

I got the cubby replacement for cd changer part # 8-97129-980-0 from St. Charles and installed it tonight, but it doesn't seem to fit correctly
I used the brackets from the CD changer and pushed the plastic pegs into the holes on the bracket and then screwed in the brackets... is this incorrect?
The box holds firms, but there is a gap between the front of the box and the trim.
Please help.

[Moncha]

NOT being smart, could itbe upside down?

[AnalogVX]

I don't remember using any brackets when I installed mine. It just bolted right up to where the CD changer was and the trim snapped back on around it.

[joe-yamma]

thanks Moncha, but I tried flipping it over and it is the same.

AnalogVX - that may be the answer... I had to use the CD Changer brackets with mine... maybe they sent me the wrong one.

[joe-yamma]

I just talked with Merlin and from what he sees, the box doesn't come with brackets, etc.
Would anyone be willing to take a pic of their cubby and send it to me for comparison?

[Tone]

One on right is correct and mounts fine - left one might be able to take CD brackets....

[joe-yamma]

thanks Tone... i got the box on the left and used the brackets from the CD changer.
i inserted the two plastic "pegs" on each side of the box into the holes that were used on the cd brackets to bolt them onto the CD changer (the holes lined up perfectly).

this resulted in the box mounting firmly, but the front of the box is approx 3/8" from the back of the trim leaving a gap.

i could probably drill new holes in the CD changer brackets to accomodate the plastic pegs, but i wanted to see what everyone else used.

is that box on the right the old part number that was discontinued or can i still get it?

joe

ps - i will take a pic of my box and mounting tonight

[joe-yamma]

Sorry guys, I haven't had a chance to take a pic on fmy cubby box, but it is exactly like the one on the left in Tone's picture above.
Has anyone had any luck mounting this style of box?

Is the other box (8-97114-757-0) still available? It says "Part Discontinued" on my invoice from St Charles.

I was thinking of checking to see if it is stil available from St Charles or one of the other Isuzu parts places before I start drilling and modifying the CD changer brackets.

[GoIsuzu]

Part 8-97114-757-0 is discontinued. No stocking dealer listed on our dealer to dealer parts locator, so all I can add to this thread is a good luck finding one.