Results 1 to 6 of 6

Thread: Rear speaker access

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2003
    Location
    Former Owner 0216
    Posts
    863
    Thanked: 1

    Rear speaker access

    Did the search and found little information. Can someone highlight how to take the rear panels off to access the rear speakers? I have only seen the two plastic pins loacted at the top of the upper panel and not sure if that is all. Speakers seem a bit tough to get at on the VX.

    Thanks

  2. #2
    Member Since
    Nov 2002
    Location
    2000, Maroon, VehiCross, 0152
    Posts
    30
    Thanked: 0
    Very Carefully. The rear panels are a day-long job. Let me tell ya. There's a million of the little panel tabs that need to be popped off. I'd go buy about 2 dozen of them before you start the process as you'll lose many of them. I cant recall the exact procedure as I havent had mine of since 2003, but just take your time and have lots of patience. Dont try to rush it!

  3. #3
    Member Since
    Sep 2002
    Location
    '99 Ebony VX #0038
    Posts
    1,256
    Thanked: 0
    Detailed instructions are available in the VX Workshop Manual, which is available on Tone's website. Look under:

    8. Body and Accessories
    + 8J. Exterior / Interior Trim
    + Interior Trim Cover and Assist Grip
    Calmini Cone Air Filter, PowerVault PV2 Muffler, OME Trooper Springs, Rancho RS9000X Shocks, 285/75R16 Nitto Grappler AT's, Pioneer DEH P8000R In-Dash CD, Amps and Drivers Built by Orion, Wires and Fuse Blocks by KnuKonceptz, Vibration Damping by BQuiet, Alarm System featuring Auto Start and Remote Windows, Yakima LoadWarrior w/Full Size Spare, Debadged/Custom Titanium Grill Logo, Tint (5% Rear / 20% Front), Steel Braided Brake Lines, G2 Painted Calipers

  4. #4
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    Here's a post on dynamating that has some photos to help too.

    http://www.vehicross.info/forums/sho...66&postcount=8
    Scott / moncha.com

  5. #5
    Member Since
    Apr 2004
    Location
    NC 1999, ironman, 0358
    Posts
    323
    Thanked: 0
    I sent you instructions how to do the job (Check your yahoo address)...hard part is the upper seat belt...it requires a torx bit (size 50 or 55).
    Western North Carolina...
    Veni, Vidi, Velcro
    (I came, I saw, I stuck around)

  6. #6
    Member Since
    Dec 2003
    Location
    Former Owner 0216
    Posts
    863
    Thanked: 1
    Received the email dkmiller and thanks to everyone for the other infomation.

Similar Threads

  1. Need Rear Speaker Writeup
    By ipd in forum VX Modifications...
    Replies: 1
    Last Post: 08/31/2016, 12:07 PM
  2. Rear Speaker Sizes
    By alanbradley in forum VX Talk...
    Replies: 5
    Last Post: 09/22/2009, 06:24 AM
  3. Access to the rear speakers?
    By JAFO in forum VX Modifications...
    Replies: 11
    Last Post: 02/28/2008, 09:36 PM
  4. Rear speaker replacement
    By Chopper in forum VX Modifications...
    Replies: 20
    Last Post: 10/31/2007, 06:17 PM
  5. Rear Speaker Cover
    By Mark B in forum VX Talk...
    Replies: 3
    Last Post: 09/01/2006, 05:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails