So here's the deal,
I had an acci. this winter, tangled with a tree & crunched r/r 1/4 panel...it also snapped the weld on the bar from the frame to the axle housing moving the right side of the axle back far enough to pull the drive shaft out of the splines.All the bodywork etc. came out perfect but...after replacing the axle,axle housing,suspension links & entire driveshaft,there is still a vibration.
I replaced all 4 tires & the rim is straight & they all balanced up fine. After replacing the axle housing, the alignment came out spot on.Between my bodyshop guy, mechanic & myself, were running out of ideas.
Anyone have any ideas...even longshots, on what could be causing this?
Any & all help is greatly appreciated.
TIA, Ldub