Results 1 to 5 of 5

Thread: Check engine - Codes po171, po174, po303

  1. #1
    Member Since
    Mar 2005
    Location
    2000, Green Dragon, 0475
    Posts
    24
    Thanked: 0

    Unhappy Check engine - Codes po171, po174, po303

    Greetings all!

    New to the forum and have a question.

    I just moved to Houston and drove my 2000 VX (aka: Suzie, my girlfriend named her) down from Connecticut. I have owned Suzie for about 2 years and she has had most of the typical problems (CD player, headlight gaskets, wheel peel, etc).

    I just hit about 85000 and this morning my check engine light went on and she is idling real rough. Jumps from about 200 rpm to 1500. Sometimes she will smooth out and other times she may stall. Went to Autozone and they gave me the codes po171 (lean on bank1), po174 (lean on bank 2), and po303 (cylinder 3 misfire). Any suggestions.. ..I am heading out to jiggle wire harnesses, check vacuum lines, and do all the other basics. Wanted to check if anybody had any experience with these codes before I call the shop.

    Also, any VXers in Houston?

    Thanks,
    Adam Rapp

  2. #2
    Member Since
    Dec 2002
    Location
    1999,Wht/blk debadged Ironman,#0188
    Posts
    380
    Thanked: 0
    Welcome Adam-
    Sounds like an intake manifold leak. It is fairly common. I just repaired mine, and am very happy to say my rig is running better then ever-
    I would email/PM Tone as he is a good guy and I actually flew him out here to work on mine. Helpful and I get the reassurance of it being done proper-
    He atleast could set you straight on a good mechanic as he is from Texas.
    Good Luck-
    xDx
    face the mirror

  3. #3
    Member Since
    Mar 2005
    Location
    2000, Green Dragon, 0475
    Posts
    24
    Thanked: 0
    Wow...talk about a quick response! Thanks for the advice. I saw some of his posts and I think I would rather make the trip to Austin to have him work on it if that's the case. Either way I will definitely be in touch.

    Adam

  4. #4
    Member Since
    Sep 2004
    Location
    1999, Astral Silver, VX, 0938
    Posts
    1,127
    Thanked: 0
    Hey: You might also have the "Fuel Pump Pressure" checked. I had the same prob a couple of times within a one week period (idle up/down), then one day it just wouldn't start. After the pump fuse was replaced found the fuel press low (pump overloaded and blew the fuse) Found the fuel press. low. Had the Fuel pump replaced and haven't had either prob return...
    [SIGPIC][/SIGPIC]
    " Jeeps are nice, Barbie has one"

  5. #5
    Member Since
    Dec 2002
    Location
    1999,Wht/blk debadged Ironman,#0188
    Posts
    380
    Thanked: 0
    Fuel Pump could be it as well, but I just had the same codes so IMO it is prolly intake gaskets, but regardless hope you get it dialedp-

Similar Threads

  1. how to check abs codes
    By zadam123 in forum VX Troubleshooting...
    Replies: 12
    Last Post: 12/24/2011, 08:47 PM
  2. engine codes P0327, P0161
    By pbkid in forum VX Talk...
    Replies: 11
    Last Post: 04/20/2009, 08:24 PM
  3. Long drives and engine codes....
    By Kenny in forum VX Talk...
    Replies: 14
    Last Post: 06/27/2007, 05:38 PM
  4. engine codes?
    By zadam123 in forum VX Troubleshooting...
    Replies: 9
    Last Post: 05/08/2007, 01:17 PM
  5. Engine Codes?
    By colmhd in forum VX Troubleshooting...
    Replies: 2
    Last Post: 10/13/2005, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails