Results 1 to 3 of 3

Thread: Belt Drive Pulley Noise?

  1. #1
    Member Since
    Mar 2005
    Location
    01 Ebony - #0379
    Posts
    793
    Thanked: 0

    Belt Drive Pulley Noise?

    I've got a pretty loud noise (sort of a howling) from the belt drive when I start up on a cold morning, it goes away after 10 minutes of driving. I'm quite sure it's a bad bearing in a pulley (I've ran into this before on another vehicle).
    I started the engine with the belt off for a few seconds and noise wasn't there.. I've replaced the idle pulley and tensioner pulley and a new Gatorback belt because it was a cheap way to start diagnostics- no luck noise still there. So that leaves the water pump and the power steering pulleys (It really does sound like it's coming from the power steering pulley). Before I try and replace those, I was wondering if anyone has ran into this noise and how they managed to fix it.

    A few more questions:
    Anyone have any recommendations or otherwise for aftermarket water pumps (a good quality one)?
    Can I replace the pulley on the power steering or is a bigger assembly that I have to get?

    Thanks for any advice.
    Ken

  2. #2

    Arrow

    My experience with water pumps...if the motor overheats or runs warmer than normal...it is probably the water pump.
    Youshould also be able to tell if the power steering pump is going just by the simple fact the it will be harder in the steering dept.
    My quick simple test for finding out where the noise is coming from: get a stethescope(or a steel rod) place it on the water pump and or the power steering pump near the bearings and put your ear to the other end of the rod...you will find out real quick which one is making all the noise.
    Good Luck with that.
    John

  3. #3
    Member Since
    Jun 2002
    Location
    1999 White Ironman 0769
    Posts
    223
    Thanked: 0
    I had something simular and it was the A/C comp pully starting to freeze up.
    VX's don't need no stinking mod's.
    But they're sure fun!

Similar Threads

  1. Anyone have a source for the Serpentine Belt Idler Pulley?
    By ben-man in forum VX Troubleshooting...
    Replies: 3
    Last Post: 01/19/2016, 04:55 AM
  2. Got a part No. For A JDM Fan Belt? + Pulley Bearings?
    By crotchrocket in forum JDM Parts & Accessories
    Replies: 6
    Last Post: 08/05/2009, 03:37 AM
  3. Timing Belt Replaced - Crank Pulley Question
    By SilverBullet75 in forum VX Troubleshooting...
    Replies: 8
    Last Post: 08/19/2006, 03:49 PM
  4. Need Help With Drive Belt
    By KristyRemo in forum VX Troubleshooting...
    Replies: 3
    Last Post: 05/08/2006, 07:05 PM
  5. Drive train noise
    By PBR in forum VX Troubleshooting...
    Replies: 5
    Last Post: 03/25/2003, 07:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails