Results 1 to 4 of 4

Thread: Change RPM limit

  1. #1
    Member Since
    May 2005
    Location
    1999 white
    Posts
    2
    Thanked: 0

    Change RPM limit

    We have installed a 24v/150A alternator in our vehicle and need to limit the engine RPM to avoid blowing it up, preferably retarding at 3000 and limiting at 3500.

    I have not found any aftermarket kits to limit the RPM or change the shift points - any tips from y'all?

  2. #2
    Member Since
    Jan 2005
    Location
    Former owner of 01 Ironman #0723, 01 Dragon #0590
    Posts
    952
    Thanked: 0
    I've seen similar devices in dragsters (bracket racers) but they require an aftermarket ignition system.

    Why not go with a larger pulley on your alternator instead?

  3. #3
    Member Since
    May 2005
    Location
    1999 white
    Posts
    2
    Thanked: 0
    We need the alternator to have high output when the engine is idle so we needed a smaller pulley - the alternator that we chose will do 100A@24v@1900 (alternator shaft RPM).

    With the Vehicross idling at 750, we needed about 2.5:1 ratio.

  4. #4
    Member Since
    May 2003
    Location
    2001,Dragon,VX1105
    Posts
    108
    Thanked: 0
    You probably should have read this thread before purchasing. Maybe this alternator could do what you need without blowing up.

    Rickster has done a lot electronically and could proabably help with getting you the juice you need.........

    http://www.vehicross.info/forums/showthread.php?t=3008

Similar Threads

  1. Oil Change
    By Mark B in forum VX Talk...
    Replies: 11
    Last Post: 11/20/2009, 01:22 PM
  2. Possible name change
    By handeeman in forum VX Talk...
    Replies: 1
    Last Post: 06/24/2009, 04:12 PM
  3. The NO LIMIT OFFROAD Uwharrie 4x4Cross 2008
    By E-ZooZoo One in forum Meets...
    Replies: 10
    Last Post: 05/04/2008, 01:37 PM
  4. oil change
    By etlsport in forum General Tips...
    Replies: 18
    Last Post: 06/30/2006, 01:19 PM
  5. oil change
    By RobVX in forum VX Troubleshooting...
    Replies: 9
    Last Post: 03/12/2003, 02:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails