Lifts & wheels Dazed and Confused

[Pigpen]

Hey all, first let me say I love this place. I am on this site quite abit, I may not post much but I am here none the less.

Here is the problem. I started the research for lifting the V this Jan. Since that time, I have read every thread and sidebar on the lifts and tires. You all have managed to confuse the hell out of me, as no one seems to concur on tires (specifically size) and the relationship to the amount of trimming to use with the OME 912s. Some say no trimming, some say buy a chainsaw and a bring a preist.

Seriously lets have a Thunderdome and figure this one out. If you dont believe me use the key word "lift" and/or "tires" in a search and see all the different answers. Specific answers would be nice, such as what is needed to mount 33" or 32" BFG ATs. I have noticed some threads with other tires which just require an off set to mount.

Right now I have the 912s sitting in my garage gathering dust.

Before the flame session begins on me, I would like to thank Bill Oliver (Triathlete) for the great install guide for the 912s.

KK flame away and thanks

[SPAZZ]

if all you have is OME912's and want to put 33's on...good luck and have fun with that Priest, chainsaw, and don't freek when the pea soup starts flying

[AnalogVX]

I have not lifted my VX...yet. But I can say this. The amount of trimming will depend on your wheel width and offset. Wider wheels will cause the tire to well...be a little wider than if it were mounted an a narrower rim. Add any difference in offset and that puts the tire even further out past the wheel well. I would wager that people that say no or little trimming are still using stock or a 7" aftermarket rim. People that are calling up Clergy may be using an 8" or wider rim and have a different offset.

[nocturnalVX]

I agree with Spazz & Rich completely. I have 31" tires on 8" rims, and believe I wouldn't have had to trim the cladding at all had I first done the lift.
That said, the reason there are so many posts (and so much info) is that there are so many different lift/wheel/tire combinations on our VXes.

[Triathlete]

Pigpen,
I will be in Sierra Vista (Ft. Huachuca) Racing this Saturday (July 23). If you'd like to check out my lift and tire set up let me know. I race at 6 and should be done by 9ish. Let me know and we can exchange phone #'s. Also just to get your interest up am planning an over night camping/wheeling trip for Sept. More info to come later!

[VXcaver]

So yours is the Proton I've seen in Sierra Vista/Ft. Huachuca! My pops lives in Sierra Vista in the summer and we've done some off-road trips around Sierra Vista. Cool area, lots of history. I can't help much on the tire info - just wanted to say welcome. As you've figured, Billy Triathlete is the go-to guy around here for info on tires/lifts/etc.

[Pigpen]

Bill, I will try to link up with you on Sat. what time does the Tri end and where?
Barnes Field House? let me know.

[dkmiller68]

Billy,
What kind of racing are you doing...is it using the VX or running/biking?