How-To Request

[TEN36VX]

Would any of you folks adept at wiring like help me out?

I would like to rewire the front lights so that the horn lights remain constant on, but flash as the turn signal. And if you like have the side markers constant off, but flash with as the turn signal.

This mod would be nice as I might loose the front ambers with the custom bumper I am working on getting. I could probably figure it out but thought if somebody knows what they are doing it might save me some trial and lots of error.

Thanks.

[Triathlete]

Tone has a kit that leaves the side marker lights on but they flash with the turn signals. Then all you have left is the front lights to deal with.

[Raque Thomas]

Here's a link to Moncha's (Scott) tutorial on converting the side markers to blink. Suppose you could do the same with the horns - but not sure. If you try it, let us know if it works (the horn conversion)!

[Moncha]

It should workon the horn lights as far as the flashing part.. You'd have to figure the "Constant on" part though. It shouldn't be too hard, just figure it by running a constant hot that would be switched by the ignition.. I also did a how to on adding an ignition switched fuseblock that would help out.
Here's a couple of links...

Switched Fuse Block

Flashing Side Marker

Hope it helps..