Supercharger 0-60 times?

[Syntek VX]

I was working on the VX this past weekend doing the 60k tune up stuff with my friend and I told him I was doing the exhaust with a custom Borla setup at a locla shop this week and I was almost ready (money wise) to drop on a supercharger. He asked me what times it would run once I had everything bolted on and I was like "Umm..... faster than it is now ".

I was wondering if anybody had any 0-60 times with a supercharger and exhaust maybe even a g-tech reading? I'm not to worried about 1/4 since i doubt i'll be using it as a track truck. I tried to search and couldn't really come up with anything definative. I was hoping maybe 7 seconds flat for 60 but that might be optimistic in a 4k lb PUV. My friend has a 03 grand cherokee with an exhaust and cai which my vx runs dead even with to 60 with a custom CAI on my VX and a nasty sounding leak in my intake gasket. He claims it's stock was 8.4 sec so maybe 8 flat to 7.9 0-60 with his mods. Is this about right? Anybody with a SC I'd love to hear from you. Thanks Guys and Gals.

[Cyrk]

I have never done any 0-60 times... but with the SC your about 75HP more than stock.
I would guesstimate: 0-60: 7.4 to 7.6 and 1/4: 15.2 to 15.8

Dyno recap:
http://www.vehicross.info/forums/sho...9&postcount=11

-Dave

[Ldub]

Cyrk,
In your never ending quest for more power, have you looked into water/ methanol injection? There's a kit from Snow performance in the Summit catalog that I've been looking at, also google water/methanol injection & see what ya think.
Syntek, sorry about the hijack...I'll try to clock some 0-60's this week & get back to ya.
Ldub

[Cyrk]

No I have not looked into... but my shop just told me about it... hummmm

[MZ-N10]

Cyrk,
In your never ending quest for more power, have you looked into water/ methanol injection? There's a kit from Snow performance in the Summit catalog that I've been looking at, also google water/methanol injection & see what ya think.
Syntek, sorry about the hijack...I'll try to clock some 0-60's this week & get back to ya.
Ldub

isnt water injection to prevent predet?

[evorent]

0-60' 6,3s, 13.1s - 1/4m
modif.supercharger alpine/smaller wheel/
motec m800 engine ECU
3'exhaust /home made /


2 x t35R soon :-)) ,but transmition............. hmmm :-) bum?

[deton8r]

evorent - can you post more information or a link about the motec m800 engine ECU?

Thanks in advance

[Cyrk]

evorent... no way... I smell B.S.

Do you have a time slip or a dyno run you can show us?

Also what size pulley are you running with on the SC? The smallest one I know available is the 5psi one.
If you are running those times... please share with us what has worked for you in more detail.

I know that AlaskaVX (15.2) and jayfotos (15.6) have taken there VX's to the track and mustered up those times.

-Dave

[MZ-N10]

didnt alaska and jayfotos both run on truck tires?

[WormGod]

13.1???????

Ya, I gotta see a scan of a slip to believe that one. I used to run a gutted '70 Nova with a 350 small block putting out more hp than the VX could even store with the back seats rolled up and I was only getting high 12's.

I demand you to make me a believer, heh.

[AlaskaVX]

ya I am raising the BS flag as well, I ran my 15.2 with stock tires at stock height, and I even took the seats out I believe. I was really trying to get under 15 sec so I could enter the big boy tourney.

[evorent]

13.1???????

Ya, I gotta see a scan of a slip to believe that one. I used to run a gutted '70 Nova with a 350 small block putting out more hp than the VX could even store with the back seats rolled up and I was only getting high 12's.

I demand you to make me a believer, heh.

ok my ''friend'' i will send to you scan of slip

also some more info about our cars,company,projects,etc :-))
http://forums.evolutionm.net/showthread.php?t=107156
http://forums.evolutionm.net/showthread.php?t=117853

15 years in motorsport /rally,racing,dragracing/

next project:
- VX 2xt35
- VX ''SVT lightning'' 2wd

and one more thing :-)

car is fast as tuner is good :-)
regards

[AlaskaVX]

That is one thing Alaska really needs is a good tuner, just not enough work.... yet.

Pleas answer the above post Q's.... I am real interested

How much did the M800 unit run you with install and tuning? Was your tuning done on a dyno or real time world tuning aka on the road or does it have the ability to adjust fuel and timing curves on it's own once you set a parameter? Also how much boost are you running with the smaller pully?

[WormGod]

ok my ''friend'' i will send to you scan of slip

also some more info about our cars,company,projects,etc :-))
http://forums.evolutionm.net/showthread.php?t=107156
http://forums.evolutionm.net/showthread.php?t=117853

15 years in motorsport /rally,racing,dragracing/

next project:
- VX 2xt35
- VX ''SVT lightning'' 2wd

and one more thing :-)

car is fast as tuner is good :-)
regards

Why the "friend"? Aw, no need to emphasise my doubt. I am simply asking for proof on what is "theoretically" impossible without heavy modification. Play nice now.

[MZ-N10]

to upload

"gallery/gallerylinks/upload photo(browse button)"

to link pictures, add

"[IMG]URL of photo[/IMG]"