Need Wiring Help!!!!

[SPAZZ]

I know there is alot of wiring technical gurus out there who can do this no problem. PLEASE, help...I need dash lights back. They went out and I have replaced every fuse, every bulb, every switch, knob, now I have an Axiom display I need to try swap out for the VX display.

[mbeach]

I might be able to help -but I need to know the question first.

[Tone]

Same ol spazz.... The dash lights go out in your VX dash so unable to fix, you change to an Axiomn display that has different plugs? This will be an easy swap....not. But Mbeach talks the tech so maybe.

[mbeach]

I don't know what an Axiom display looks like -are the sending units compatable with the VX?

If you got it to work, it should be as simple as finding the switched/dimmer controlled wire to add lights.
The GRN/RED wire at Pin 1 of the taillight relay is your dash light wire. It comes alive when the combination switch is turned to ON.

Try following the traces from a light socket on the Axiom dash cluster to find the pin/point where the Ax receives its 12V source.

If you actually got it to work, all you need to do is put a jumper in from the taillight relay to the display's connector at the appropriate place.

Can you take pics?