Page 2 of 2 FirstFirst 1 2
Results 16 to 28 of 28

Thread: Spazz LineX'ed his VX!

  1. #16
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    ...

    Before I lined it I removed the rack, Door handles were taped off as wellas all rubber seals, VX was already debadged(except 4WD badge which I left on purpose), the mirrors...have you seen bushwhipped mirrors before or what happens when a rock hits them??? not pretty and scras look really ugly on them.

    Yes. The wind noise is HUGELY reduced inside.

    The scoop is a "HOt Air Extraction Scoop" which extracts hot air from inside engine bay and pushes it to outside of VX through the hole. That is why it is facing backwards instead of forward or it would be a "Air Induction" Scoop.

    Everyone I have seen or I should say who have seen the VX and commented since I did it, especially the offroaders, says "AWESOME" especially the liner on the whole thing.

  2. #17
    Member Since
    Oct 2003
    Location
    2000 Kaiser
    Posts
    375
    Thanked: 0
    Spazz, got balls dude. i woulda never even though about it.


    why?

    looks like azz

    but just my opinion. be a good hunting truck now though

  3. #18
    Member Since
    May 2005
    Location
    1999 Ebony 0529
    Posts
    72
    Thanked: 0
    I really dig it, takes alot of guts to do that to a car. Thing should be indestructable now. Not that it wasn't before

  4. #19
    Member Since
    Jun 2002
    Location
    1999, ASTRAL
    Posts
    734
    Thanked: 0

    Thumbs up Congrats...

    Looks like a VX dipped in chocolate. Mmmmmm :_drool: CHOCOLATE:homer:

    Spazz did it his way. More power to Ya!
    NAVIGATOR

  5. #20
    Applied with live cats on sticks? Mo'Debly the most baddest damn the torpedoes finish I've seen on the VX yet. I'm thinkin' of dippin' these two meddlin' possums I got in Rhino and turnin em loose! (If I had a second VX.) I like it!!!
    thankyouthankyouverymuch

  6. #21
    Member Since
    Jun 2005
    Location
    2001 Dragon Green Mica ,#1393
    Posts
    52
    Thanked: 0

    Thumbs up

    Kudos to Spazz! i like it. i would have gone a little diffrent direction myself. (maybe 2 colors, cladding and hood insert diffrent from the "paint") but it looks a LOT more rugged! after reading the story it is a good way to save some money... and also save on those darn rock chips in the paint.


    ...now if only the windshield could be helped that way.. hmmmm...

    question... did you have to special order the Line-x? and how did you apply it? just curious in case some others (me) would like to do something similar.
    If Life is passing you by... DOWNSHIFT!!!!!!!!

  7. #22
    Member Since
    Jul 2004
    Location
    2000 Black VX 0363
    Posts
    766
    Thanked: 0
    it looks like theres a coating of ice on it.
    2000 Black VX 105k

  8. #23
    Member Since
    Dec 2005
    Location
    Former Owner of 'ZEUS' aka 1031
    Posts
    3,185
    Thanked: 1


    But opinions are like a-holes...
    I have been thinking about using Herculiner applied with a roller on my cladding but seeing this VX makes me seriously second guess that idea! Thanks for posting these pics as I actually logged on this morning to do a search on something like this - applying bedliner material to the cladding... besides Rhino Lining.
    Sent from my "two hands on a keyboard"

  9. #24
    Member Since
    Aug 2006
    Location
    2001 Proton VX 0136
    Posts
    201
    Thanked: 0
    I know I am rehashing an old thread, but I came across this while looking for hood scoop info.

    Spazz, at first, I was not into it...all I saw was the cladding had been sprayed. Thought the body looked that way coz of compression in the image. But...after going back and forth from the pics to the thread...I like it...really, really like it. I wouldnt do it to mine coz i am a hadcore yeller fan. BUT if I had your options I would definitely have done what you did and never look back. Good job man.


    Not to mention you just the upped the "whoa, what is that" factor by tenfold!

  10. #25
    Member Since
    Dec 2004
    Location
    1999, Black, Vehicross, 1984
    Posts
    243
    Thanked: 0
    Very interesting.

  11. #26
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    Thumbs up ummm...

    they have Yeller..... better yet



    CLEAR!!!!!!!!!!!!!!!!!!!!!!!!!


    YOU CAN DO IT TOO

  12. #27
    Member Since
    Jan 2006
    Location
    1999,Satin Black and bedliner
    Posts
    239
    Thanked: 0
    Spazz, I don't know if you have seen what I did to my VX after it's wreck, but you did inspire it to some extent. http://www.vehicross.info/forums/showthread.php?t=9222

  13. #28
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    In the words of Gunnery Sgt. Hartman:

    "Private Joker is silly and he's ignorant, but he's got guts, and guts is enough"

    No offense SPAZZ, this quote just came to mind when I saw the pics.

    So, what does it feel like? How does it wash up? (or do you not plan on washing it anymore?) Also, will it dull down to a nice flat finish? Or does it stay wet looking?

    - Bart

    Quote Originally Posted by SPAZZ
    well you get what you pay for and if I paid someone to do the job I'd be out $1400 or more.

    Plus I didn't paint my VX(if I did I'd be out thousands) as some think I bedlined it. and I didn't want the smooth thin shiny stuff either, no sir, I used the high build thick durable stuff. Pluss it only cost $200 to do the whole VX.

    Some kids ran into the side of the VX going 65MPH down the freeway and the insurance check for the body work went to make up past due amount on the VX and bring it current with enough to get the liner and do it myself. With my financial situation priorities were in order for me to take the money and run and fix the body damage, paint, cosmetics myself. Also preventing the VX from being repoed which would not be fun because I'm on a zero interest loan
    and only 7 payments left.
    Oh and I didn't line the door handles either which someone mentioned. Plus, I don't have to worry about the paint, nor do I cry like most of you when those jerks slam their car doors into your VX's either

Similar Threads

  1. My turn for LineX
    By Marlin in forum VX Modifications...
    Replies: 62
    Last Post: 07/04/2013, 11:54 AM
  2. LineX pics
    By Marlin in forum VX Modifications...
    Replies: 88
    Last Post: 06/19/2013, 05:49 PM
  3. Thanks Spazz!!!!
    By Triathlete in forum VX Talk...
    Replies: 6
    Last Post: 06/13/2006, 10:16 PM
  4. Tod 4 spazz
    By SGT.BATGUANO in forum VX Talk...
    Replies: 6
    Last Post: 09/06/2004, 01:03 PM
  5. Linex VS paint VS undercoat spray.
    By valenki in forum VX Modifications...
    Replies: 5
    Last Post: 09/07/2003, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails