Results 1 to 9 of 9

Thread: Suspension "clunk"

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3

    Suspension "clunk"...update...need some more ideas

    Alright, heres the problem...
    When backing up, turning (both directions) and hitting the breaks I get a loud clunk that feels like its coming from the suspension. This has happened 3 times in the last 2 days but doesn't happen every time. Nothing is rubbing, CV boots are good, nothing is loose under there. I'm not sure if it is the front or rear. The only thing that has changed since this started was new tires (same as the ones that were on it). All lugs are tight.
    Any ideas??????
    I had my neighbor (mechanic) watch and listen but could not duplicate it when he was there.
    Last edited by Triathlete : 04/30/2006 at 06:49 PM
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  2. #2
    Member Since
    Mar 2006
    Location
    '99 Ebony 1499
    Posts
    6
    Thanked: 0
    I had clunks under hard braking that went away when I lubed the joints.

  3. #3
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Hmmmm, hasn't happened again. I hate phantom problems...never know what it was or when it might rear its head again!

  4. #4
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    luz, where did you lube/what did you use? i get a clunk during take off after a hard brake

  5. #5
    Member Since
    Mar 2006
    Location
    '99 Ebony 1499
    Posts
    6
    Thanked: 0
    I used Mobil One Synthetic grease. There are other posts in the forum that discuss lubing the joints, but it's really easy.

    There are three spots where there is a nipple or zerk joint that you plug your grease gun into. One on each U Joint and one on the shaft. Park on a level surface and if you can't get to the nipples, move the VX up or down a foot to where the shaft rotates and you can access the nipples.

    Just be sure to get a grease gun with flexible tubing because it's hard to get a good angle without it. You can plug into the zerks and squeeze new grease into the joints until the old grease oozes out. Wipe off the excess and you're good to go. But be advised that the one on the shaft takes a while to fill up if it's completely dry as mine was.

  6. #6
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Now it started doing in while going forward also (to a lesser extent). I think I've narrowed it down to the rear end. Sounds like the LSD is engaging (the jerking feels like the right side). Is the left side the usual drive side until the LSD locks up? When I changed out the diff fluid with mobil1 I only put one bottle of additive in it. Tomorrow I'm going to get a second and add to it plus check the fluid level (although there are no signs of leakage). We'll see what happens. Got two weeks to figure it out before heading to Moab.

Similar Threads

  1. Loud "clunk" when shifting out of Park
    By JoeU in forum VX Troubleshooting...
    Replies: 12
    Last Post: 06/16/2012, 11:18 AM
  2. Replies: 35
    Last Post: 10/04/2010, 02:37 PM
  3. Replies: 14
    Last Post: 05/04/2009, 11:35 AM
  4. Replies: 36
    Last Post: 10/12/2008, 06:59 PM
  5. VX "Grasshopper" asks VX "Masters"....
    By 01 Dragon in forum VX Talk...
    Replies: 10
    Last Post: 02/02/2003, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails