ISUZU Rims.....

[nfpgasmask]

Yeah, the rock crawlers are decent, and I have seen a lot of folks wearing those, but I am still unsure if those rims had to be modified or if they found rock crawlers with a large bore. I think I am going to go with some Trooper wheels and just paint them or powder coat them, depending on which ones I settle on...

Bart

VX Crazy has the rock crawlers, check out the gallery.

Rock Crawlers

[Daver]

When i had my wheels made for th Axiom i made the center bore larger at the shop. If you find a wheel that you like that will fit except for the bore you could take them to a local machine shop and have the back side of the wheel machinded out to fit the hubs, this is what i did to make mine fit perfectly. Just a thought, also any wheel that will fit a Hummer H3 will fit the Vx, they are a stock offset of +40mm so they will work except for the center bore which you could have made to fit as i stated eariler.

Heh. I've been looking all over for the stock H3 offset and I couldn't find it. Considering trading my VX for an H3 (black, como no).

Wanted to find out if my OZs would fit on an H3. Thanks!

-Daver

[nocturnalVX]

Yeah, the rock crawlers are decent, and I have seen a lot of folks wearing those, but I am still unsure if those rims had to be modified or if they found rock crawlers with a large bore. I think I am going to go with some Trooper wheels and just paint them or powder coat them, depending on which ones I settle on...

Bart

I have the black steel Tech 1 Rock Crawlers too & they required no mods whatsoever. However, I went with 31" Pro Comp ATs on 15x8 wheels instead of 29" on 15x7, so some trimming of the front cladding was needed. Check my gallery for pics. Get a wheel & tire set cheap from here.

[nfpgasmask]

I have the black steel Tech 1 Rock Crawlers too & they required no mods whatsoever. However, I went with 31" Pro Comp ATs on 15x8 wheels instead of 29" on 15x7, so some trimming of the front cladding was needed. Check my gallery for pics. Get a wheel & tire set cheap from here.

Cool! Thanks for the info man!

Bart