Results 1 to 10 of 10

Thread: engine codes?

  1. #1
    Member Since
    Jun 2002
    Location
    1999 silver 1346
    Posts
    505
    Thanked: 0

    engine codes?

    I went to autozone and am getting 2 codes PO400 and PO440?

    any ideas on what these might be?

    also if i reset the check engine light does anyone know how many miles it resets itself if i want to get an inspection. I was told that after i reset the light a inspection machine will know and wont pass me untill a certain amount of miles have gone by without the light.

    thanks
    adam

  2. #2
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, #0580
    Posts
    1,887
    Thanked: 5
    It took my truck about a week before I could get the codes to qualify after a reset (it depends on the amount of driving you do and not the actual time) - same issue - I was pulling a code for a faulty battery and the reset disqualified me for passing the emissions test.

    -- John
    John Eaton
    Original Owner
    2001 Proton Yellow #580
    Atlanta GA

    http://wildtoys.com/vehicross/
    http://vehicross.blogspot.com/

    "Metaphors be with you"

  3. #3
    Member Since
    Jun 2002
    Location
    1999 silver 1346
    Posts
    505
    Thanked: 0
    thats what i ment , how many miles will it reset?

  4. #4
    Member Since
    Jun 2002
    Location
    1999 silver 1346
    Posts
    505
    Thanked: 0
    I was told one of the codes is a egr valve, does anyoine know whrere this is located and is it easy to change myself?

  5. #5
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    P0400 Exhaust Gas Recirculation Flow Malfunction
    P0440 Evaporative Emission Control System Malfunction

    heres a link to a list of codes http://www.obdii.com/codes.html

    i dont know details about the EGR valve, but i remember a thread saying it wasnt terribly difficult to pull, but also that a lot of times you could just clean it out and it would be okay, do a search for EGR and youll probably return some good results

  6. #6
    Member Since
    Jun 2002
    Location
    1999 silver 1346
    Posts
    505
    Thanked: 0
    Quote Originally Posted by etlsport
    P0400 Exhaust Gas Recirculation Flow Malfunction
    anyone have any idea what this might be?

  7. #7
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    id say the best place to start is cleaning your EGR (exhaust gas recirculation) valve well with some carb cleaner

    http://www.vehicross.info/forums/sho...gr+valve+clean

    http://www.vehicross.info/forums/sho...gr+valve+clean

    http://isuzufaq.ibctech.ca/#faq1

  8. #8
    Member Since
    Feb 2003
    Location
    2001, Dragon Green, 1023
    Posts
    28
    Thanked: 0

    P0440 Evaporative Emission Control System Malfunction

    I have this problem now too. After spending $1200 on a major tuneup Fuel System, emergency brake, and engine gaskets, 2 days later my Check Engine light came on again. A friend of mine scanned it for me and pulled the subject line code off. (P0440)

    Does anyone know what this really means and how to fix it? (If needed)

    Thank you.

    Perry
    "If you're not living on the edge, You're taking up too much space...." -Perry Kloska

  9. #9
    Member Since
    Feb 2003
    Location
    2001, Dragon Green, 1023
    Posts
    28
    Thanked: 0

    P0440 Evaporative Emission Control System Malfunction

    Nevermind... I did a search for "P0440" and got what I needed... I was trying "P0440 Check Engine Code" and didn't get anything but this thread.

    I reset the light, hopefully it stays off....

  10. #10
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0

    Check Engine light

    My Check Engine light came on recently but I don't know what codes came up but the mechanic did indicate that it was an out of tolerance indication on the O2 sensor. Since it was reading (although out of spec) he didn't think the sensor was bad. He replaced the airfilter and cleaned the MAS (Mass Airflow Sensor) and reset the light. So far (600 miles) the light hasn't come on again.

    BTW - the engine was knocking horribly any time you stood on the gas but the above "repair" took care of that too.

Similar Threads

  1. engine codes P0327, P0161
    By pbkid in forum VX Talk...
    Replies: 11
    Last Post: 04/20/2009, 08:24 PM
  2. Long drives and engine codes....
    By Kenny in forum VX Talk...
    Replies: 14
    Last Post: 06/27/2007, 05:38 PM
  3. suggestions for engine P1404 and P0402 codes
    By bielsubob in forum VX Troubleshooting...
    Replies: 5
    Last Post: 01/03/2007, 02:20 PM
  4. Engine Codes?
    By colmhd in forum VX Troubleshooting...
    Replies: 2
    Last Post: 10/13/2005, 05:12 PM
  5. Check engine - Codes po171, po174, po303
    By Rapp in forum VX Troubleshooting...
    Replies: 4
    Last Post: 03/27/2005, 10:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails