Fresh Lift/Wheels/Tires

[Bimati]

Wanted to say thanks to all you people who helped and offered tips and tricks for the lift. Couldn't have done it without you, and it's done just in time for COZUUUUUUUU!!!!!!

Thanks tons!!!!

OME 912's, 2006 Yukon Wheels and Tires.

[WormGod]

People.... stop lifting your VXs already!

I want to lift mine SO BAD but it wouldnt fit in the garage afterwards. And since she is my weekend ride now, I don't want to leave her out in the scary anti-automobile atmoshpere known as Mother Nature's wrath.

Nice job. Get some meat under there now and make her complete.

[VCrossfan]

Looks Nice...How tight were the fronts as to the i.d. (center bore) of the wheel. I think GM Trucks/SUV's are 100.3mm and Vx's are 108mm. Did you have to machine the I.D. of the wheel or space it out???

[biju]

Nice job, jeff.

See you this weekend.

-biju.

[Bimati]

Center bores:

These wheels had a center bore of about 80MM, and didn't allow room for machining so I used 2-1/4" Billet aluminum spacers on all four wheels. This is the perfect size to clear the front hub and give the hubless look to the center of the wheel.

Beware, even with a lift and only 265/70/17's, Due to the extra offset created by the spacers, there is a bunch more trimming to do than installing wheels without spacers.

PEEEEEECE,
Bim

[JoFotoz]

Talking of which....!!!

Any news on the custom rack towers you were fabricating?

Can you give a time line and approx cost??

If its not gonna happen ...let me know and I'll try and do some.

TIA

jo

[kpaske]

Cool! It's an Isuzu with GMC wheels and a big HONDA grill logo!!

[nfpgasmask]

I'm sick with jealously also, especially with that backdrop. It makes me hate living in Chicago even more.

Bart

Wanted to say thanks to all you people who helped and offered tips and tricks for the lift. Couldn't have done it without you, and it's done just in time for COZUUUUUUUU!!!!!!

Thanks tons!!!!

OME 912's, 2006 Yukon Wheels and Tires.