Results 1 to 7 of 7

Thread: My VX in its new back yard...

  1. #1
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2

    Talking My VX in its new back yard...





    (and for all you Reno haters, this is like 45 minutes away for me now )

    Bart

  2. #2
    Member Since
    Jul 2005
    Location
    1999, Black, VX
    Posts
    94
    Thanked: 0
    Dude that is amazing, I'm terribly envious. I love the mountains, but then again an hour away from me is the blue ridge.

    Custom Independent4x 4.5" suspension lift, Custom Independent4x 3" body lift, 36x13.50R16 Irok radials, 16x8 American Racing Mojave teflons, Warn locking front hubs, Independent4x extended braided brake lines, Independent4x heavy duty tie rods, Calmini extended bump stops, Calmini extended brake line brackets, Rancho RS9000X shocks,1.5" wheel spacers, And trimmed cladding


  3. #3
    Member Since
    Feb 2006
    Location
    99 Silver 0210
    Posts
    383
    Thanked: 0
    Awesome, Bart! Glad you're settling in.

    Let us know when you are heading in the direction of the square states and we'll tear it up...

  4. #4
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    Arrow sweet pics

    and just a quick day trip for the Rubicon if you were ever up to it!!!


    Now all you need is some 4:56 3rd members for the mountains..oh..btw, I just happen to have a set for sale if your interested.
    Great mod for all that offroading and mountains you are into in Reno.

    Also, if you are not so inclined to install them yourself I wouldn't mind traveling to Reno from here in Boise if you covered my travel expense.
    I'm sure you wouldn't mind me crashing on your floor..as I wouldn't ask for any hotel fees or stupid mark up expenses. This would be just a one full day mod, spread out over two at most.

    also if you need some AISIN manual hubs or even AUTO hubs or any other Isuzu part I can hook you up with a set of those too.

    let me know brunsjt@hotmail.com

  5. #5
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    Hey SPAZZ, tell me more about the 4:56 3rd members, this is a mod for the diffs, right?

    Can you elaborate?

    Bart

    Quote Originally Posted by SPAZZ
    and just a quick day trip for the Rubicon if you were ever up to it!!!


    Now all you need is some 4:56 3rd members for the mountains..oh..btw, I just happen to have a set for sale if your interested.
    Great mod for all that offroading and mountains you are into in Reno.

    Also, if you are not so inclined to install them yourself I wouldn't mind traveling to Reno from here in Boise if you covered my travel expense.
    I'm sure you wouldn't mind me crashing on your floor..as I wouldn't ask for any hotel fees or stupid mark up expenses. This would be just a one full day mod, spread out over two at most.

    also if you need some AISIN manual hubs or even AUTO hubs or any other Isuzu part I can hook you up with a set of those too.

    let me know brunsjt@hotmail.com

  6. #6
    Member Since
    Feb 2003
    Location
    '76 IH Scout II Tubed, 40"s, locked, etc
    Posts
    1,090
    Thanked: 0

    4:56 replaces stock 4:30 axle gear ratio

    But, instead of spending an arm and a leg and having to buy the 4:56 Rings, 4:56 Pinions, bearings, races, seals, shims, crush collars, ets... for each 3rd member and then paying someone to remove the 3rd members if you do not know how and then set them up.

    Each 3rd member is like $375 for just set up fee alone and that is if you boought all the parts and everysingle one of them are good and no problems.

    From the dealer for front and rear for everything the setup stuff is like $600
    Most auto stores have a hard time having in stock anything for the VX and are more expensive on most of these parts and only cheeper on a couple.

    4:56 Ring/Pinion sets are what you can find them for. Like a couple to a few hundred ..depending on used or new and on the quality of the manufacture.

    As for the labor on removing your 3rd members front and rear..the rear would be a couple to few hundred...the front would be like a $1,000 as they have to remove the whole entire front axle which takes about a whole day and more than one person in a shop as they want to get it done faster and safer.

    Plus you would have to provide your replacement cv boots I'm sure and all parts they break or were necessary. Plus they charge how much time the manual says to take whether or not they take apart your whole entire Front VX both Left and right Sides which is what the manual says to takes apart.

    So, if they take the short cuts I and others take that are really good at this, they are done, showered, cleaned up, and having dinner on you with their family and still charging up your bill and you still could be told your VX is in pieces. Plus, nowdays who knows even if they knew how to do it right in the first place.


    Botton line...if you get a set of already setup 3rd members. All you need to do is have the stock ones removed and the 4:56 ones put in therir place. But, the whole ordeal is a process for someone IF they do not know what they are doing. It seams these days these mechanics are not trained right..or you have to wave the proper amount of cash in front of their faces before they do know what they are doing in order also for them to do the job proper.

    Serious, how many times have you taken your VX to Isuzu and they said "My Isuzu tech is only here once a certain weekend every other month" or something like that. I asked him if this was Isuzu that I am bringing my VX too. He really couldn't answer that.

  7. #7
    Member Since
    Apr 2006
    Location
    2000 dragon green 0496
    Posts
    440
    Thanked: 0
    Love the pic. I will be in Lake Tahoe in February for Skiing.
    My VX will be at home in sunny Florida.

Similar Threads

  1. Look at what I found at a junk yard!
    By Hcloud13 in forum VX Talk...
    Replies: 20
    Last Post: 01/25/2013, 07:43 PM
  2. How to search for VX salvage yard parts
    By deermagnet in forum General Tips...
    Replies: 16
    Last Post: 05/06/2010, 07:53 AM
  3. A Day at the Salvage Yard
    By Ldub in forum VX Talk...
    Replies: 5
    Last Post: 08/10/2008, 06:39 PM
  4. Junk Yard Parts
    By ZEUS in forum General Tips...
    Replies: 3
    Last Post: 07/17/2007, 05:13 PM
  5. Which salvage yard has VXs?
    By paultvx in forum VX Talk...
    Replies: 10
    Last Post: 09/08/2003, 06:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails