Results 1 to 6 of 6

Thread: Need some info !!!!

  1. #1
    Member Since
    Sep 2006
    Location
    99,white,Ironman,0498
    Posts
    5
    Thanked: 0

    Need some info !!!!

    Hey Guys,Gals !!!!
    As a new VX owner,I have a question on the transmission.
    Other automatics I've driven in the past seem to freewheel when coasting.
    My VX seems to be still engaged until it slows down a bit then I hear a clunk which I think is one of the clutches disconnecting.
    I have some maual hubs coming and plan on modifying my TOD so I can run rear wheel drive only when hubs are unlocked.
    I'm getting decent mileage 18-19 and performance is good but I can't help but think this transmission staying engaged may be costing me some mileage due to the drag.
    Do all VX's do this or just mine ???? Any ideas ???
    Also I did a rebadge on mine.I made it into a YAMAHA.
    No one knows what it is anyway,so I thought I'd confuse them more.
    Thanks for the help.Take care.

  2. #2
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    mine does it too.. thats what makes me able to stand driving an auto, works kinda like engine braking in a manual

  3. #3
    Member Since
    Aug 2003
    Location
    1999,Silver,Vehicross,0928
    Posts
    1,087
    Thanked: 0
    Quote Originally Posted by farmpro
    Hey Guys,Gals !!!!
    As a new VX owner,I have a question on the transmission.
    Other automatics I've driven in the past seem to freewheel when coasting.
    My VX seems to be still engaged until it slows down a bit then I hear a clunk which I think is one of the clutches disconnecting.
    I have some maual hubs coming and plan on modifying my TOD so I can run rear wheel drive only when hubs are unlocked.
    I'm getting decent mileage 18-19 and performance is good but I can't help but think this transmission staying engaged may be costing me some mileage due to the drag.
    Do all VX's do this or just mine ???? Any ideas ???
    Also I did a rebadge on mine.I made it into a YAMAHA.
    No one knows what it is anyway,so I thought I'd confuse them more.
    Thanks for the help.Take care.
    instead of installin manual hubs(which u could if u wished) u can always cut the light blue wire under the passenger seat. its the front siliniod(sp?) for tod, just be sure to put a load on it so it doesnt throw lights.

  4. #4
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2

    Engine Braking...

    Speaking of "Engine Braking", can someone explain exactly what that is? I see signs out here in Nevada all the time that say "No Engine Braking".

    I'm curious to know what these signs are for and what Engine Braking is exactly. I thought it was like putting your vehicle into a lower gear while you are going downhill but I don't know exactly...

    Bart

    Quote Originally Posted by etlsport
    mine does it too.. thats what makes me able to stand driving an auto, works kinda like engine braking in a manual

  5. #5
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2

    Nevermind...

    http://en.wikipedia.org/wiki/Engine_braking

    Quote Originally Posted by nfpgasmask
    Speaking of "Engine Braking", can someone explain exactly what that is? I see signs out here in Nevada all the time that say "No Engine Braking".

    I'm curious to know what these signs are for and what Engine Braking is exactly. I thought it was like putting your vehicle into a lower gear while you are going downhill but I don't know exactly...

    Bart

  6. #6
    Member Since
    May 2006
    Location
    2001 Foxfire 1232
    Posts
    234
    Thanked: 0
    Quote Originally Posted by MZ-N10
    instead of installin manual hubs(which u could if u wished) u can always cut the light blue wire under the passenger seat. its the front siliniod(sp?) for tod, just be sure to put a load on it so it doesnt throw lights.

    I thought I read on another thread that just cutting that wire will NOT allow the front axle to freewheel?

Similar Threads

  1. Need info
    By Doctor7474 in forum VX Talk...
    Replies: 10
    Last Post: 04/14/2010, 09:48 AM
  2. info?
    By malozi777 in forum VX Troubleshooting...
    Replies: 12
    Last Post: 01/01/2009, 08:04 AM
  3. Info
    By SPAZZ in forum General Tips...
    Replies: 5
    Last Post: 12/18/2007, 04:45 PM
  4. Looking to buy a VX, need some info
    By bozGP in forum VX Talk...
    Replies: 6
    Last Post: 11/07/2006, 05:21 AM
  5. Looking for a JDM? Need info.
    By mark in forum Japanese Domestic Model (JDM) VXs
    Replies: 4
    Last Post: 08/15/2005, 04:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails